JT30 /JT30 All Terrain Operator’s Manual Systems and Equipment - 152
Quick Wrench
CMW
To Join
1. Scribe straight line across joint on both sides of
separating line (A).
2. Scribe second line (B) on moveable side of joint in
the opposite direction of tightening action 3/8” (9.5
mm) away from first line.
3. Turn handle until second line (B) meets first (A).
4. Turn handle opposite direction two turns to relieve
pressure.
5. Remove quick wrench components.
To Break
1. Turn handle until joint is broken.
2. Turn handle opposite direction two turns to relieve pressure.
3. Remove quick wrench components.
NOTICE: Ensure that engine is not on or tracker control has disabled the unit before breaking joints.
07om071h.e
s
A
AA
A
B
B
To Next Page
Loading...