Service - 225 JT30 /JT30 All Terrain Operator’s Manual
As Needed
CMW
Change Fluid Pump Oil
Change fluid pump oil every 2000 hours.
To change:
1. Drain at plug (3). Ensure that magnetic drain
plug is cleaned of debris before reinstalling.
2. Add NDO at fill plug (2). Maintain fluid level at
fill plug (2). Inspect oil level at sight glass (1).
As Needed
Location Task Notes
DRILLING
UNIT
Change pipe auto lubricator pail TJC
Change hydraulic filter Any time system is opened
Check pipeloader pads
Check front pipe guide inserts
Check fluid pump ball valve
Check track tension and condition
Check track support slide pads
Change inner water swivel (seal kit)
Change engine drive belt
Change air filter
Check pipeloader chute opening
Check saver sub
Replace pipe glide blocks
Replace carriage slide bars
Replace fuses
To Next Page
Loading...