JT30 /JT30 All Terrain Operator’s Manual Operation Overview - 66
Drilling
CMW
Drilling
1. Start system. See page 102.
2. Engage tracker control if desired. See page 143.
3. Drill first pipe. See page 111.
4. Record bore path. See page 121.
5. Enable automated pipeloader system. See page 112.
6. Add pipe. See page 113.
7. Drill remaining pipes in pipe box.
• Correct direction. See page 117.
• Engage cruise control. See page 164.
• Shift pipe box. See page 159.
8. Add additional drill pipe to empty box (see page 161) to complete bore.
9. Surface drill head. See page 121.
• Remove drill head.
• Grease downhole tool (AT mode).
To Next Page
Loading...