JT30 /JT30 All Terrain Operator’s Manual Service - 228
As Needed
CMW
Check Track Tension and Condition
Check track tension and condition and adjust or
replace as needed. See your Ditch Witch dealer for
replacement parts.
To adjust:
1. Pump MPG into fitting (shown) until the length
of the compressed spring, dimension (A), is
12.75” (323.85 mm).
2. Drive straight forward one machine length and
check tension again.
Check Track Support Slide Pads
Check track support slide pads. Replace as needed. See your Ditch Witch dealer for replacement parts.
To Next Page
Loading...