Need help?Do you have a question about the dixell COOL MATE XLH360 and is the answer not in the manual?
General| Model | COOL MATE XLH360 |
|---|---|
| Series | COOL MATE |
| Product Type | Temperature Controller |
| Buzzer | Yes |
| Frontal Protection | IP65 |
| Power Supply | 230V AC |
| Digital Input | Configurable |
| Output Type | Relay |
| Probe Type | NTC |
Instructions for safe and proper use of the instrument.
Important safety advice for installation and operation.
Details on the defrost function, modes, and parameters.
Setting time parameters for cycle phases.
Setting humidity setpoints for the running phase.
Setting temperature setpoints for cycle phases.
Procedure to initiate the maturing cycle.
Procedure for manual cycle termination.
Adjusting cycle parameters during operation.
Specific button combinations for device control.
Meaning of icons and symbols shown on the display.
Configures defrost method: electrical heater or hot gas.
Sets defrost interval or Smartfrost mode.
Sets the maximum length of defrost.
Time interval between defrost cycles.
Steps to upload configuration from controller to hot key.
Steps to download configuration from hot key to controller.
To Next Page
