Need help?Do you have a question about the dixell XLR130 and is the answer not in the manual?
General| Series | XLR |
|---|---|
| Inputs | Up to 4 |
| Communication Protocol | ModBUS RTU |
| Buzzer | Yes |
| Output Type | Relay |
| Type | Controller |
| Protection rating | IP20 |
Lists critical safety measures to follow before and during instrument operation and maintenance.
Overview of the microprocessor-based controllers for refrigerating units, highlighting features and outputs.
Details defrost control modes, including timed defrost for XLR130 and heater/hot gas for XLR170.
Details the functions of individual keys (SET, UP, DOWN, AUX, ON/OFF) for operation and programming.
Explains how to perform specific actions like locking/unlocking the keyboard and entering programming mode.
Steps to display and change the target temperature set point using the SET and arrow keys.
Steps to access user-accessible parameters (PR1) by combining SET and DOWN keys.
Instructions to access the protected parameter list (PR2) via PR1 and a security code.
General procedure for modifying any parameter value using SET and arrow keys.
Lists and defines parameters related to temperature regulation, differentials, and set point limits.
Lists and defines parameters related to defrost type, mode, timing, and termination.
Lists and defines parameters for fan operation modes, delays, and stop temperatures.
Defines parameters for temperature alarms, delays, and fan regulation set points.
Defines parameters for configuring digital inputs like door switch, generic alarm, and energy saving.
Defines parameters for configuring the auxiliary relay's function (alarm, fan, light, etc.).
Defines parameters for setting workday and holiday defrost start times.
Lists alarm messages, their causes, and the corresponding output actions.
Provides housing, dimensions, mounting, protection, connections, power supply, and display details.
Diagrams showing terminal connections for the XLR130 model, including free voltage and direct load connections.
Diagrams showing terminal connections for the XLR170 model, including free voltage and direct load connections.
Lists default values for regulation parameters like Set point, Differential, and limits.
Lists default values for defrost parameters including type, mode, termination, and interval.
Lists default values for alarm parameters like temperature limits and delays.
Lists default values for digital input configuration, polarity, and alarm delay.
To Next Page
