8
©
2018 DJI All Rights Reserved.
AGRAS MG-1P SERIES Quick Start Guide
2. Mount the sprinklers with white hoses under motors M3 and M8 (with white circle marks). Mount the sprinklers
with black hoses under motors M4 and M7 (with black circle marks). Mount each of the four sprinklers using
three M3×8 (Plus) screws, then insert the hoses into the clips at the bottom of the frame arm junctions. Be
sure to mount the sprinklers to the mounting holes nearer to the inside of the aircraft, with the hoses facing the
frame arm.
3. Insert the hoses on both sides into the clips on the landing gear.
4. Mount the fender to the right landing gear leg to avoid spills when pouring liquids. Handle with care to
avoid damage to the fender.
To Next Page
Loading...
