Waypoints: Record a flight path, then the aircraft will fly along the same path repeatedly
while you control the camera and orientation. The flight path can be saved and reused in
the future. (Not Spark)
Follow Me: A virtual tether is created between the aircraft and the mobile device so that
the aircraft can track your movement as you move. Note that Follow Me performance is
subject to GPS accuracy on the mobile device. (Not Spark)
Home Lock: If this is enabled then when you pull the pitch stick backward the aircraft
will move towards its recorded Home Point. (Not Spark)
Course Lock: If this is enabled it will lock the current nose direction as the aircrafts’
forward direction. The aircraft will move in the locked direction regardless of its orientation
(yaw angle). (Not Spark)
Draw: In this mode, the aircraft will fly along a flight path drawn on-screen. As it flies, it
will automatically brake and hover when it sees obstacles provided that the lighting is
adequate – no darker than 300 lux nor brighter than 10,000 lux. To use this mode make
sure the aircraft is at least 2m (6ft) above the ground, select the mode, next draw a line
on the screen to create a path. Finally, Tap GO and the aircraft will fly along the
path. (Phantom 4 Pro/A + Inspire 2)
Terrain Follow Mode: In this mode, the aircraft uses its Downward Vision System to
maintain height above ground between 1 and 10 meters. This mode is designed for use
on grassland sloped ay no more than 20°. When this mode is turned on the aircraft will
record its current height and maintain it as it ascends the slopes. NOTE: the aircraft will
not descend on downwards slopes.
To use this mode tap (Intelligent Flight Icon) (Phantom 4 Pro/A + Mavic + Inspire 2 )
Spotlight Pro: In this mode allows a single pilot to capture complex, dramatic images.
The gimbal will automatically adjust to keep the camera pointing at the subject.
Quick Mode: use your finger to draw a square around the object to begin tracking
Composition Mode: Use your finger to draw a square. When the subject enters the
square, press the C2 button to begin tracking. Press the C2 button again to stop tracking.
In free mode: you can control the aircraft’s heading independently of the camera.
In follow mode: the aircraft heading will be the same as that of the camera. (Inspire 2)
To Previous Page
Loading...
Need help?
General
