dji GOGGLES N3 - Broadcasting to Other Goggles; Panorama Video Playback; Head Tracking

To Next Page

To Previous Page

Broadcasting to Other Goggles

1. Enter the DJI Goggles N3 menu, select Transmission and enter the Pilot sub-menu.

2. Turn on Broadcasting mode, and the device number will be displayed.

3. On the other goggles, enter the goggles menu, select Transmission and enter the

Audience sub-menu.

4. If any nearby goggles turns on the Broadcasting mode, the device and its signal

strength can be viewed in the Audience sub-menu. Select the device number to

access the liveview. Switching to Pilot sub-menu to exit the shared liveview.

5.6 Panorama Video Playback

1. Import videos to a microSD card, and insert it into the goggles.

2. Enter the goggles menu and then Album, then select the video le to play.

3. Push the 5D button backward to open the playback menu, and select

for display

switch settings.

4. Exit the shortcut menu after conrming the selections, then the video will be played

based on the display settings.

• Refer to DJI ocial website for more information about the supported video

formats. https://www.dji.com/goggles-n3/specs

• The goggles have no speaker but can be connected to headphones via the USB-

C port. Only supports Type-C headphones with built-in DAC (digital-to-analog

converter).

5.7 Head Tracking

Head tracking is only supported by certain aircraft and can be enabled by selecting in

the shortcut menu of the goggles.

After enabling head tracking, the horizontal orientation of the aircraft and the gimbal tilt

can be controlled using head movements during ight. The remote control device will

only control the ight path of the aircraft, the gimbal cannot be controlled.

DJI Goggles N3 User Manual