2 Preparing the Goggles
2.1 Powering on the Goggles
Press the power button once to check the current battery level.
Press once, then press and hold for two seconds to power the goggles on or o.
Blinking Pattern Battery Level
Solid Green 40-100%
Solid Yellow 11-39%
Solid Red 1-10%
If the battery level is low, it is recommended to use a USB charger to charge the device.
The table below shows the battery level during charging:
Blinking Pattern Battery Level
Pulses Yellow 1-39%
Pulses Green 40-99%
Solid Green 100%
DJI Goggles N3 User Manual
8 © 2024 DJI All Rights Reserved.
To Next Page
Loading...