dji GOGGLES N3 - Appendix; Specifications; Updating Firmware

To Next Page

To Previous Page

7 Appendix

7.1 Specications

Visit the following website for specications.

https://www.dji.com/goggles-n3/specs

7.2 Updating Firmware

Use one of the following methods to update the rmware:

Using DJI Fly App

When used with DJI Neo or DJI Avata 2, the aircraft, goggles, and remote control device

can be updated together.

Power on the aircraft, goggles, and remote control device. Make sure all the devices are

linked. Connect the USB-C port of the goggles to the smartphone. Run DJI Fly, and follow

the prompt to update. An internet connection is required.

Using DJI Assistant 2 (Consumer Drones Series)

1. Power on the device. Connect the device to a computer with a USB-C cable.

2. Launch DJI Assistant 2 and log in with your DJI account.

3. Select the device and click Firmware Update on the left side of the screen.

4. Select the rmware version.

5. Wait for the rmware to download. The rmware update will start automatically. Wait

for the rmware update to complete.

• Make sure to follow all the steps to update the rmware, otherwise the update

may fail.

• The rmware update will take several minutes. It is normal for the screen to turn

o or the goggles to restart automatically during the update. Wait patiently for

the rmware update to complete.

• Make sure the computer is connected to the internet during the update.

• Make sure the device has sucient power before updating the rmware.

• DO NOT unplug the USB-C cable during the update.

• Note that the update may reset the parameters. Before updating, take note of

your preferred settings and recongure them after the update.

DJI Goggles N3 User Manual