dji GOGGLES N3 - Direct Remote ID; Aftersales Information

To Next Page

To Previous Page

4. SW update issues

Follow the instructions in the user manual to update the rmware. If the rmware

update fails, restart all the devices and try again. If the problem persists, contact DJI

support.

5. Procedures to reset to factory default or last known working conguration

Open the goggles menu and select Settings > About > Reset All.

6. How to restore use after long-term storage?

Fully charge the device rst and then it can be used normally.

7.6 Direct Remote ID

Method of uploading the UAS Operator Registration Number to the aircraft:

1. Connect the goggles to the mobile device.

2. Launch DJI Fly on the mobile device.

3. Enter DJI Fly, select Safety > UAS Remote Identication, and then upload UAS

Operator Registration Number.

7.7 Aftersales Information

Visit https://www.dji.com/support to learn more about aftersales service policies, repair

services, and support.

DJI Goggles N3 User Manual