dji GOGGLES N3 - Linking; Linking Via DJI Fly App (Recommended); Linking Via Button

To Next Page

To Previous Page

4 Linking

Preparation before linking:

1. Power on the aircraft, the goggles, and the remote control device before linking. Make

sure the devices are within 0.5 m of each other during linking. Make sure the devices

are updated to the latest rmware version and have enough battery level.

2. Open the goggles menu, select Status and make sure that the aircraft model

displayed at the top of the menu is correct. Otherwise, select Switch from the upper

right corner of the menu and then select the correct aircraft.

4.1 Linking via DJI Fly App (recommended)

Keep the goggles connected to the smartphone after activation. Tap Connection Guide

on DJI Fly from the smartphone and follow the on-screen instructions for linking.

4.2 Linking via Button

1. Linking the aircraft and the goggles:

a. Press and hold the power button on the aircraft until it beeps once and the

battery level LEDs start to blink in sequence.

b. Press and hold the power button on the goggles until the goggles start to beep

continuously and the power button starts to blink yellow.

DJI Goggles N3 User Manual