dji GUIDANCE - Page 12

Guidance User Manual
12
©
2015 DJI. All Rights Reserved.
2. Mounting the Guidance Sensors on all four sides of the carrier:
Fix the Guidance brackets to the Guidance Sensor. Then mount the brackets onto the extension bay
of the DJI MATRICE. Ensure the VBUS port on the Guidance Sensor is facing upwards. Failure to do
somayleadtocriticalsystemerrorsandunintendedightbehavior.
3. Check that all the parts are correctly installed and securely attached to the carrier. If you are using the
DJIMATRICE,ensurethatallGuidanceSensorsareinstalledatagainstthesurfaceoftheexpansion
bay. Failure to do so may compromise the performance of the Guidance system.