dji GUIDANCE - Installing the Guidance System; Mounting the Guidance Core

Guidance User Manual
©
2015 DJI. All Rights Reserved.
9
Other Robotic Platforms
Installing the Guidance system to other robotic platforms requires a customized mount. Refer to the
dimensionsinthegurebelowtobuildyourownmount.
Unit
:
mm
14
53.5
78.5
130
12
4×M2
φ
1.6
5
6
Installing the Guidance System
Once the intelligent system and carrier are chosen, start installing the Guidance system. This section
provides instructions on mounting and connecting the Guidance modules. Read these instructions
carefully.
Mounting the Guidance Core
The inertial sensors inside the Guidance Core have been calibrated in the factory to achieve optimal
performance. Be sure to mount the Guidance Core in the correct position and orientation.
Mounting Requirements
Read the following requirements carefully before mounting the Guidance Core:
1. Orientate the Guidance Core so that the arrow points to the front of the carrier. If your carrier is an
aircraft, the arrow should point to the nose of the aircraft.