dji GUIDANCE - Connecting the Guidance System

Guidance User Manual
©
2015 DJI. All Rights Reserved.
15
VBUS ④
VBUS ②
VBUS ③
VBUS ①
VBUS ⑤
FrontRear
Left
Right
Ensure the VBUS port of downward facing Guidance Sensor points to the front of the carrier,
and the VBUS ports of the other Guidance Sensors point upwards without obstruction. Failure
todosomayleadtocriticalsystemerrorsandunintendedightbehavior.
×
√
Connecting the Guidance System
Follow the instructions below to complete the connections between the Guidance Sensors and the
Guidance Core:
1. Connect the VBUS port of the front facing Guidance Sensor to the VBUS1 port of the Guidance Core.
2. Connect the VBUS port of the right facing Guidance Sensor to the VBUS2 port of the Guidance Core.
3. Connect the VBUS port of the rear facing Guidance Sensor to the VBUS3 port of the Guidance Core.
4. Connect the VBUS port of the left facing Guidance Sensor to the VBUS4 port of the Guidance Core.
5. Connect the VBUS port of the downward facing Guidance Sensor to the VBUS5 port of the Guidance Core.