dji GUIDANCE - DJI Guidance Assistant; Installation

Guidance User Manual
©
2015 DJI. All Rights Reserved.
17
DJI Guidance Assistant
This section shows you how to configure the Guidance system through the DJI Guidance Assistant
software.Completethe“Standard”or“DIY”settingsbeforeusingthesystemforthersttime.
Standard:
UsedforDJIightcontrolsystems.DefaultsettingsaresetfortheDJIMATRICE.
DIY:
Used for other intelligent systems.
Battery Connection for Non-DJI Control Systems
Choose a suitable 11.1V~25V battery and connect it to the XT60 port.
Complete all the other connections before connecting the power cable of the Guidance system.
Installation
1.DownloadtheDJIGuidanceAssistantinstallationlefromtheDJIofcialwebsite.
2.ConnecttheGuidanceCoretothePCviatheMicro-USBcable.
3.Launchtheinstallationprogramandfollowingtheon-screeninstructionstocompletetheinstallation.
4. Double click the desktop icon to launch the DJI Guidance Assistant software.
TheDJIGuidanceAssistantissupportedby32-bitand64-bitversionsofWindows7and
Windows 8.
When using the Guidance SDK, be sure to set the aircraft type as DIY and select ‘USB’ or
‘UART’ from the menu.