DJI Inspire 3
Maintenance Manual
10
©
2023 DJI All Rights Reserved.
Flight Controller
• After powering on the aircraft, wait for the self-check to complete and that there are no ight
controller error messages in the app.
• Within 1 minute of powering on the aircraft a strong GNSS signal is reached in an outdoor
open environment, with the Home Point automatically updating and the RTK data meeting
the heading measurement standard.
Aircraft Structure
Aircraft Appearance
• The aircraft body is clean and not damaged or deformed.
• Clean the aircraft body with a dry, soft cloth paying special attention to the lenses of the
infrared sensing and vision systems and the heat dissipation vents.
Screws
• Make sure that all the screws on the aircraft body are securely tightened, paying special
attention to the screws that connect the motor and the carbon tube.
To Next Page
Loading...
