dji INSPIRE 3 Maintenance Manual

©
2023 DJI All Rights Reserved.
3
Introduction 5
Disclaimer 5
Flight Safety Guidelines 6
Flight Condition Requirements 6
Operational Requirements 6
Flight Restrictions 6
Storage and Transportation 6
Updating Firmware 6
Pre-Flight Checklist 7
Inspection and Maintenance 8
Propulsion System 8
Motor Rotation 8
Connection between Motor and Frame Arm 8
Motor Air Filters 9
Propellers 9
Propeller Adapters 9
Flight Controller 10
Aircraft Structure 10
Aircraft Appearance 10
Screws 10
Frame Arm LEDs 11
Battery Compartment 11
Data Ports 11
PROSSD Slot 12
Waterproof Covers 12
Heat Dissipation Vents 12
Gimbal Damping Plate 13
Gimbal Camera 13
Infrared Sensing System and Vision System Lenses, Auxiliary Lights 14
Transformation Mechanism 14
Charging Hub 15
Charging Ports 15
Heat Dissipation Vents 15
Contents

dji INSPIRE 3 Specifications

General

Camera Sensor	Full-Frame CMOS
Obstacle Sensing	Omnidirectional
Max Ascent Speed	8 m/s
Max Descent Speed	8 m/s
Internal Storage	1 TB SSD
Gimbal	3-axis (tilt, roll, pan)
Camera	Zenmuse X9-8K Air
Effective Pixels	24 MP
Gimbal Stabilization	±0.01°
Transmission System	DJI O3 Pro
Live View Quality	1080p/60fps
Remote Controller	DJI RC Plus
Remote Controller Charging Port	USB-C
Flight Time	28 minutes
Transmission Range	15 km
Max Speed	94 km/h
Operating Temperature	-20°C to 40°C
GNSS	GPS + Galileo + BeiDou
Operating Frequency	2.4000-2.4835 GHz; 5.725-5.850 GHz
Transmitter Power (EIRP)	2.4 GHz: <33 dBm; 5.8 GHz: <33 dBm
Hovering Accuracy Range	Vertical: ±0.1 m; Horizontal: ±0.3 m
ISO Range	Video: 100-25600
Shutter Speed	1/8000s to 2s
Supported File Formats	JPEG, DNG, MP4, MOV
Latency	90 ms
Remote Controller Operating Frequency	2.4000-2.4835 GHz; 5.725-5.850 GHz
Supported SD Cards	microSD
Video Resolution	8K