dji INSPIRE 3 Maintenance Manual

DJI Inspire 3 Maintenance Manual
©
2023 DJI All Rights Reserved.
9
Motor Air Filters
• The air lters are not severely damaged or deformed.
• If they are severely damaged or deformed (such as being bumped), return the aircraft to the
factory for repair.
Propellers
• Check the propellers for visible deformation, severe wear, nicks, and cracks, and if there is
any foreign matter on the propellers.
• Clean the propellers with a dry, soft cloth.
• Replace the propellers immediately if there are any visible deformations, nicks, cracks, or
severe wearing occurs.
• Replace the propellers after ying over 300 hours or one year of use.
Propeller Adapters
• The propeller adapter screws are securely tightened.
• If the screws are loose, apply a thread locker and tighten the screws.
• The propeller adapters are not damaged or deformed.
• Replace the propeller adapters if they are damaged or deformed.

dji INSPIRE 3 Specifications

General

Camera Sensor	Full-Frame CMOS
Obstacle Sensing	Omnidirectional
Max Ascent Speed	8 m/s
Max Descent Speed	8 m/s
Internal Storage	1 TB SSD
Gimbal	3-axis (tilt, roll, pan)
Camera	Zenmuse X9-8K Air
Effective Pixels	24 MP
Gimbal Stabilization	±0.01°
Transmission System	DJI O3 Pro
Live View Quality	1080p/60fps
Remote Controller	DJI RC Plus
Remote Controller Charging Port	USB-C
Flight Time	28 minutes
Transmission Range	15 km
Max Speed	94 km/h
Operating Temperature	-20°C to 40°C
GNSS	GPS + Galileo + BeiDou
Operating Frequency	2.4000-2.4835 GHz; 5.725-5.850 GHz
Transmitter Power (EIRP)	2.4 GHz: <33 dBm; 5.8 GHz: <33 dBm
Hovering Accuracy Range	Vertical: ±0.1 m; Horizontal: ±0.3 m
ISO Range	Video: 100-25600
Shutter Speed	1/8000s to 2s
Supported File Formats	JPEG, DNG, MP4, MOV
Latency	90 ms
Remote Controller Operating Frequency	2.4000-2.4835 GHz; 5.725-5.850 GHz
Supported SD Cards	microSD
Video Resolution	8K