EasyManuals Logo

dji INSPIRE 3 Maintenance Manual

dji INSPIRE 3
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
DJI Inspire 3
Maintenance Manual
©
2023 DJI All Rights Reserved.   
7
Pre-Flight Checklist
It is recommended to perform the following routine checks before each ight.
1. Only use genuine parts that are in good condition. DO NOT modify or alter the aircraft, its
components or parts, or install non-DJI-approved third-party external devices.
2. All devices, such as the remote controller and intelligent batteries are fully charged.
3. There is no foreign matter, such as water, oil, soil, or sand, inside the aircraft or its
components. The air vents of the aircraft, camera, and motor are not blocked.
4. The propellers are securely mounted and not damaged or deformed. DO NOT use chipped
or broken propellers.
5. The aircraft motors are clean and in good condition. Rotate the propellers to examine the
motors. Make sure the motors can rotate smoothly without any abnormal sounds. If there
are any abnormalities, stop using the aircraft immediately and contact DJI Support.
6. The camera lens is clean and in good condition and the gimbal can rotate without any
obstructions.
7. The surface of the vision system, infrared sensors, gimbal camera, FPV camera, and
auxiliary lights are clean.
8. The port covers have been closed properly.
9. The ight area is outside any GEO zone and the ight conditions are suitable for ying the
aircraft.
10. Place the aircraft on open and flat ground. Make sure there are no obstacles, buildings,
or trees nearby and that the aircraft is 5 m away from the user. Make sure that the user is
facing the rear of the aircraft.
11. The ESC is beeping after powering on the aircraft.
12. Open DJI Pilot 2 in order to assist with aircraft operations. Without having the ight data
recorded by the DJI Pilot 2 app in certain situations (including the loss of your aircraft), DJI
may not be able to provide aftersales support to you or assume liability.
13. DJI Pilot 2 and the aircraft rmware have been updated to the latest version.
14. Check DJI Pilot 2 for any ESC error messages. Make sure to follow the prompts and x any
abnormalities before ight.
15. The DJI Pilot 2 app displays at least 8 satellites and the aircraft has a strong GNSS signal.

Other manuals for dji INSPIRE 3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dji INSPIRE 3 and is the answer not in the manual?

dji INSPIRE 3 Specifications

General IconGeneral
Camera SensorFull-Frame CMOS
Obstacle SensingOmnidirectional
Max Ascent Speed8 m/s
Max Descent Speed8 m/s
Internal Storage1 TB SSD
Gimbal3-axis (tilt, roll, pan)
CameraZenmuse X9-8K Air
Effective Pixels24 MP
Gimbal Stabilization±0.01°
Transmission SystemDJI O3 Pro
Live View Quality1080p/60fps
Remote ControllerDJI RC Plus
Remote Controller Charging PortUSB-C
Flight Time28 minutes
Transmission Range15 km
Max Speed94 km/h
Operating Temperature-20°C to 40°C
GNSSGPS + Galileo + BeiDou
Operating Frequency2.4000-2.4835 GHz; 5.725-5.850 GHz
Transmitter Power (EIRP)2.4 GHz: <33 dBm; 5.8 GHz: <33 dBm
Hovering Accuracy RangeVertical: ±0.1 m; Horizontal: ±0.3 m
ISO RangeVideo: 100-25600
Shutter Speed1/8000s to 2s
Supported File FormatsJPEG, DNG, MP4, MOV
Latency90 ms
Remote Controller Operating Frequency2.4000-2.4835 GHz; 5.725-5.850 GHz
Supported SD CardsmicroSD
Video Resolution8K

Related product manuals