dji MATRICE 300 RTK - Page 36

36
©
2020 DJI All Rights Reserved.
MATRICE 300 RTK User Manual
Low
High
Battery Level Indicators display how much power remains. When the battery is turned o, press the
Power button once and the Battery Level Indicators will display the current battery level. See below for
details.
The Battery Level Indicators will also show the current battery level during discharging. The
indicators are dened below.
: LED is on. : LED is o. : LED is ashing.
Battery Level
LED1 LED2 LED3 LED4 Battery Level
88%~100%
75%~88%
63%~75%
50%~63%
38%~50%
25%~38%
13%~25%
0%~13%
Low Temperature Notice:
1. The performance of the intelligent Flight Battery is signicantly reduced when ying in low temperature
environments (temperatures below 5℃). Ensure that the battery is fully charged and the cell voltage
is at 4.35 V before each ight.
2. End the ight as soon as DJI Pilot 2 displays the “Low Battery Level Warning” in low temperature
environments. You will still be able to control the aircraft’s movement when this warning is triggered.
3. In extremely cold weather, the battery temperature may not be high enough even after warming up. In
these cases, insulate the battery as required.
4. To ensure optimal performance of the battery, keep the battery temperature above 16° C
.
5. In low temperature environments, it will take a longer time for the batteries to warm up. It is
recommended to keep the battery warm before use to reduce the warm-up time.
Checking Battery Levels
When the battery is turned o, press the Battery Level button once and the Battery Level Indicators will
display the current battery level.