©
2020 DJI All Rights Reserved.
87
MATRICE 300 RTK User Manual
1. Control the gimbal, adjust the camera zoom and aim at the target, and tap to capture a photo
directly or press the C1 on the remote controller to set a waypoint. The waypoint and photo quantity
will increase accordingly.
2. The number of planned waypoints.
3. The number of planned photos.
4. Tap to switch to map view for editing or viewing. Tap to save current settings, and a ight route
is created. When used with the H20 series gimbal and camera, tap Next to enter the AI Spot-check
page for editing. Note that it is necessary to manually check the box of AI Spot-check, otherwise
H20/H20T will only save the ight route of Live Mission Recording.
AI Spot-check
When pairing the M300 RTK with the H20 series payload, AI Spot-check is available. In AI Spot-check
page, you can switch from dierent photos, drag-select photos and adjust the size. When the route is
executed, the selected object will be accurately photographed.
a. Back.
b. Displays the waypoint number and the photo number.
c. Displays the gimbal and lens of the photo.
d. Photo thumbnails, tap to select the photo that needs to be edited accurately. The photo has been
edited by AI Spot-check, and is marked with .
e. Gesture to select the object in the photo, adjust the selection box size, drag or delete the selection
box, and the selection box will follow the picture so as to enlarge or reduce. Tap once on the picture
to hide / show other buttons and tools on the screen.
f. Tap to save the flight route settings and the AI Spot-check configurations, and a flight route is
created.
Mission Flight - Live Mission Recording
Tap Create a Route, Waypoint Flight, and Live Mission Recording to record information on the photos
captured or aircraft position for the waypoint.
1
4
2
3
To Next Page
Loading...
