dji Matrice 600 Pro

©
2017 DJI All Rights Reserved.
51
MATRICE 600 PRO User Manual
Reserved Mounting Position Dimensions
A mounting position for your own devices is reserved at the bottom of the center frame.
1. Remove the twelve M3×6.5 screws at the bottom of the center frame rst, and then remove the
expansion mounting kit.
M3×6.5 Screws
2. The dimensions of the reserved mounting position is shown as follows (unit: mm).
149.1
258.3
3×M3
120°
Ф3 8
Thread depth 4 mm
Expansion Mounting Kit