dji Matrice 600 Pro

©
2017 DJI All Rights Reserved.
11
Flight Control System
To avoid component malfunction, serious injury, and property damage, observe the following rules:
Flight Controller
1.
DO NOT attempt to modify the structure of the ight controller.
2.
DO NOT change the mounting position and orientation of the ight controller.
3.
DO NOT short out the ports on the ight controller.
4.
Connect cables in strict accordance with port descriptions.
Power Management Unit (PMU)
1.
The PMU has an input voltage range of 10.5-51 V (3-12S battery equivalent), output voltage of 9 V
and maximum output current of 2 A. Be sure to use the PMU in strict accordance with these
specications.
2.
Only use the power cable extending from the center frame to supply power to the PMU.
IMU Pro (Redundancy System)
1.
DO NOT change the mounting position and orientation of the IMU Pro.
2.
Settings in the DJI Assistant 2 are correct.
Flight Controller
1. The ight controller is neither waterproof nor oil-proof. DO NOT allow it to come into contact with any kind
of liquid.
2. Check regularly to ensure the ight controller is rmly secured.
3. DO NOT place devices producing heat near the ight controller.
PMU
1. The PMU is neither waterproof nor oil-proof. DO NOT allow it to come into contact with any kind of liquid.
2. DO NOT block or cover the PMU to maximize heat dissipation and system performance.
IMU Pro (Redundancy System)
1. The IMU Pro is neither waterproof nor oil-proof. DO NOT allow it to come into contact with any kind of
liquid.
2. Check regularly to ensure the IMU Pro is rmly secured.
Lightbridge 2 Air System
To avoid component malfunction, serious injury, and property damage, observe the following rules:
1.
ONLY use the DBUS cable that comes with the Matrice 600 Pro, or else the Lightbridge 2 Air System
will not function normally.