dji Matrice 600 Pro

©
2017 DJI All Rights Reserved.
55
MATRICE 600 PRO User Manual
DJI Gimbal Connection Illustrator
Ronin-MX
When using the Ronin-MX, set the App Output Mode in the DJI GO app to display the image on your
mobile device from the camera used with the Ronin-MX. Launch the DJI GO app > Camera View >
> Disable EXT Port, adjust the Bandwidth Allocation to ensure that the “HDMI” percentage is
more than 0%, and then set the App Output Mode to HDMI.
*You can connect the CAN cable to
the CAN Hub on the GPS cable.
A3 Flight Controller
Lightbridge 2 Air System
Ronin-MX
SRW-60G Transmitter
SRW-60G Receiver
FPV Camera
CAN1*
CAN1*
CAN
PWR HDMI
HDMI
AV
Zenmuse Z30
GIMBAL
HDMI AV
CAN1*
A3 Flight Controller
Gimbal Mounting Plate
FPV CameraOR
Lightbridge 2 Air System