dji Matrice 600 Pro

54
©
2017 DJI All Rights Reserved.
MATRICE 600 PRO User Manual
Lightbridge 2 Air System Overview
[8]
[1]
[2]
[7]
[6]
[5]
[4]
[3]
[9]
[1] HDMI IN
Supports up to 1080p60 input resolution. This port has been connected to an HDMI cable and
the other end of the cable is an HDMI-D connector.
[2] AV IN
Receives AV input from the camera.
[3] Gimbal Port
Connects to a DJI gimbal or camera.
[4] DBUS Port
Sends the remote controller signal to the ight controller. Connected to the RF port on the ight
controller upon delivery.
[5] Upgrade Port
Connected to the USB Hub built into the center frame upon delivery.
[6] Link Button
Used to link the Air System with the remote controller.
[7] Control Indicator
Indicates the status of the Air System and remote controller.
[8] Video Indicator
Indicates the video transmission status.
[9] Antenna Port
This port has been connected to an antenna extension cable upon delivery.