dji OSMO MOBILE 6 - Getting Started: Charging and Setup; Charging the Osmo Mobile 6; Attaching the Phone: Initial Steps

©
2022 DJI All Rights Reserved.
5
Getting Started
Charging
To charge Osmo Mobile 6, connect a USB adapter (not included) to the charging port
using the power cable. The battery is fully charged when the battery level indicator turns
off on the status panel.
Charging time: approx. 1 hour 24 minutes (tested in the environment temperature of 25° C
when using a 10 W charger)
Max runtime: approx. 6 hours and 24 minutes (tested with the gimbal balanced and held
steadily. This value should be taken as a reference only)
Attaching the Phone
1. Unfold the gimbal as shown. Osmo Mobile 6 will power on automatically once unfolded.
1
2