EasyManuals Logo

dji Phantom 3 Advanced User Manual

dji Phantom 3 Advanced
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
20
©
2015 DJI. All Rights Reserved.
Aircraft
Phantom 3 Advanced
User Manual
Battery Level Indicators While Charging
LED1 LED2 LED3 LED4 Battery Level
0%~25%
25%~50%
50%~75%
75%~100%
Fully Charged
Battery Protection LED Display
The table below shows battery protection mechanisms and corresponding LED patterns.
Battery Level Indicators while Charging
LED1 LED2 LED3 LED4 Blinking Pattern Battery Protection Item
LED2 blinks twice per second Over current detected
LED2 blinks three times per second Short circuit detected
LED3 blinks twice per second Over charge detected
LED3 blinks three times per second Over-voltage charger detected
LED4 blinks twice per second Charging temperature is too low
LED4 blinks three times per second Charging temperature is too high
Charging the Intelligent Flight Battery
1. Connect the Battery Charger to a power source (100-240 V 50/60 Hz).
2. Open the Protection Cap and connect the Intelligent Flight Battery to the Battery Charger. If the battery
level is above 95%, turn on the battery before charging.
3. The Battery Level Indicator will display the current battery level as it is charging.
4. The Intelligent Flight Battery is fully charged when the Battery Level Indicators are all off.
5. Air-cool the Intelligent Flight Battery after each ight. Allow its temperature to drop to room temperature
before storing it for an extended period.
We do not recommend charging the Intelligent Flight Battery and remote controller with the
standard charger at the same time, otherwise the charger may overheat.
Always turn off the battery before inserting it or removing it from the Phantom 3 Advanced.
Never insert or remove a battery when it is turned on.
ChargerIntelligent Flight Battery
Power Outlet

Other manuals for dji Phantom 3 Advanced

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dji Phantom 3 Advanced and is the answer not in the manual?

dji Phantom 3 Advanced Specifications

General IconGeneral
Maximum speed16 m/s
Frequency band2.4 - 2.483 GHz
Number of axis3
GPS (satellite)Yes
Number of rotors4 rotors
Maximum flight time23 min
Maximum ascent speed5 m/s
Maximum descent speed3 m/s
Maximum weight capacity- kg
Maximum operating distance5000 m
Megapixel12.4 MP
Video resolutions1280 x 720, 1920 x 1080, 2704 x 1520 pixels
Maximum frame rate60 fps
Camera shutter speed8 - 1/8000 s
Supported video modes720p, 1080p, 1520p
Video formats supportedAVC, H.264, MOV, MP4, MPEG4
Live view frequency band2.4 GHz
Maximum video resolution2704 x 1520 pixels
Field of view (FOV) angle94 °
Bitrate at maximum video resolution40 Mbit/s
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size64 GB
Flight modesFailsafe mode, Follow Me mode
Moving control functionsBackward, Downward, Flying sideways, Forward, Turn left, Turn right, Upward
Battery voltage15.2 V
Battery capacity4480 mAh
Transmitter battery capacity6000 mAh
Number of batteries (transmitter)1
Product colorWhite
Operating temperature (T-T)0 - 40 °C
AC adapter power57 W
AC adapter output voltage17.4 V
Equivalent Isotropically Radiated Power (EIRP)100 dBmW
Motor typeBrushless
Weight and Dimensions IconWeight and Dimensions
Weight1280 g
Battery weight365 g

Related product manuals