©2013 DJI Innovations. All Rights Reserved.12 |
2. Wait about 20 seconds.
The PowerLED: solid Green means that it is fully charged.
The System LED: blinks Greenmeans that it is normally communicating.
How to Do the Camera &Range Extender &DJI App Rebind
In the condition that your camera or range extender has been repaired or replaced by a new one, you need to
rebind camera and range extender to rebuilt a wifi-network, and use your DJI App to find the new wifi-network.
Step1: power on the camera and range extender, 10s later press the Rebind Button on Range Extender with a
cuspidal object, 5s later the SYSTEM LED is off.
Step2: wait patiently, the WiFi system of range extender will be restored about 25s later, and the SYSTEM LED will
blink green.
Step3:open DJI VISION App on your mobile device. Enter the SETTINGS->Binding,scan QR code on product
packaging, and follow instructions onDJI VISION App to operate. Finally a new Mac address will be acquired,
which indicates camera and range extender rebinds.
Step4:About 25s later, select the PHANTOM_xxxxxx network from WLAN of mobile device. Binding finished.
To Next Page
Loading...
