©2013 DJI Innovations. All Rights Reserved.14 |
2. Press the power button twice to power on the aircraft. The power LED turns solid green on and the power
capacity LEDs are on showing the voltage situation. For more battery details please refer to the <Battery
and Charge Knowledge> section.
3. Keep the aircraft stationary until the system start and self-check has finished.
4. Aircraft is warming up.
Note: Motor Start is disabled duringaircraft warming up.
5. Ready to Fly
Ready to fly (non-GPS)
Compass Calibration Procedures
IMPORTANT: Make sure to do the Compass Calibration for the first time use.
The built-in Compass can assistant to position the aircraft, which is very important during flight. As we know,
the compass is very sensitive to electromagnetic interference, which will cause abnormal compass data, and
To Next Page
Loading...
