dji PVT581 - Camera Functions; Camera Power and LED Indicators; Camera LED Status Meanings

©2013 DJI Innovations. All Rights Reserved.18 |
Cameraof PHANTOM VISION Knowledge
MainFunction Description
Power Switch(on the back of the camera)
Three stops:
(1) OFF – Powered off
(2) CAM ON – Power on, Wi-Fi off
(3) WIFI ON –Power and Wi-Fi are both on
LED Indicator (on the back of the camera)
LED
WIFI
CAMERA
Solid on
OFF
Power On; Idle State
Slow Blink (0.2s on, 1.8s off)
ON
Idle State
Fast Blink (0.1s on, 0.3s off)
ON
Accessing photos and videos in the camera
Solid on
OFF
Recording
Blink Once(0.2s on, 0.3s off)
ON/OFF
making a single capture
Blink 3 Times(0.1s on, 0.1s off)
ON/OFF
making a multiple capture,3 or 5 pictures per shot
Fast Blink(0.1s on, 0.3s off)
ON/OFF
Firmware Upgrading
(0.2s green, 1.8s amber)
ON
Recording
Solid on
ON/OFF
Critical error
Blink Slow (0.2s on, 1.8s off)
ON/OFF
Sensor error
Blink Once(0.2s on, 0.3s off)
ON/OFF
Operation failed
Blink 3 Times(0.1s on, 0.1s off)
ON/OFF
SD Card error
Blink Fast(0.1s on, 0.3s off)
ON/OFF
Upgrade error
(0.5s Green, 0.5s Amber,
0.5s Red, 0.5s Off)
ON/OFF
Camera overheat
When camera temperature goes above 80℃, the LED indicator will blink and the camera will
automatically power off when the temperature goes above 85℃
Statuses including Red is either error or malfunction
Micro-SD Card Slot(on the back of the camera)
Make sure that the Micro-SD card is inserted before you take any pictures or make any videos.
Function Button(on the bottom of the camera)
Camera in idle state
short press (<2s)
single capture