dji PVT581 - Camera App Flight Data; Flight Parameters Explained; SD Card and Wi-Fi Status Check; Aircraft Battery and GPS Status

©2013 DJI Innovations. All Rights Reserved.23 |
from you.It is also known as the Radar function.
[6]Flight parameters
If the connection betweenthecameraandtheNAZAisok,theseN/Asshouldbemeaningfuldigits
[7] SD Card Status
Highlighted when a valid SD card is inserted, otherwise, grayed out.
[8] Wi-Fi Signal Intensity
The Camera is connected to the Range Extender correctly and Wi-Fi is working normally.
[9] Aircraft Battery Level
3 grids: > 11.80V
2 grids: 11.30V to 11.80V
1 grid: 11.20V to 11.30V (should fly back)
0 grid: <= 11.20V (should land immediately)
[10] Aircraft GPS status
Highlighted when more than 6 satellites are found, otherwise, grayed out.
[11]Remained shots
It is calculated based on the current selected photo size. Zero if SD card is not inserted
[12] Camera Capture Button
Capture Button is disabled during the process of recording.
[13] Camera Record Button
A red dot blinks when the camera is recording, and the time elapsed is displayed on the top right
corner of the preview screen.
[14] Hide or show camera settings
Click to enter camera settings, and click again to exit.
[15] Hide or show flight parameters.
Click to hide flight parameters, and click again to show flight parameters.
[17]