dji RC Plus User Manual

DJI RC Plus User Manual
19
©
2023 DJI All Rights Reserved.
Customizable Buttons
The C1, C2, C3, and 5D buttons are customizable. Open DJI Pilot 2 and enter camera view. Tap
and tap to congure the functions of these buttons. In addition, combination buttons can be
customized using the C1, C2, and C3 buttons with the 5D button.
Remote Controller LEDs
1. Status LED
The status LED indicates the status of the remote controller, the aircraft, and the link between them.
Blinking Patterns Descriptions
Solid red Disconnected with aircraft
Blinking red Low aircraft battery level
Solid green Connected with aircraft
Blinks blue The remote controller is linking to an aircraft
Solid yellow Firmware update failed
Blinking yellow Low remote controller battery level
Blinks cyan Control sticks not centered
2. Battery Level LEDs
The battery level LEDs indicate the battery level of the remote controller.
Blinking Pattern Battery Level
75%~100%
50%~75%
25%~50%
0%~25%
1 2

dji RC Plus Specifications

General

Screen Size	7 inches
Brightness	1200 cd/m²
Wi-Fi Protocol	802.11 a/b/g/n/ac
Bluetooth Operating Frequency	2.4 GHz
Video Output Port	HDMI
Operating System	Android
Screen Resolution	1920 x 1200
Operating Temperature	-20° to 45° C (-4° to 113° F)
Connectivity	USB-C, HDMI
Wi-Fi Operating Frequency	2.4 GHz, 5.8 GHz
Operating Frequency	2.400-2.4835 GHz; 5.725-5.850 GHz
Max Transmission Distance	15 km
GNSS	BeiDou
Charging Time	Approximately 2 hours
Compatibility	DJI Matrice 30 Series
Battery Life	Approx. 6 hours