dji RC Plus User Manual

9
©
2023 DJI All Rights Reserved.
Preparing the Remote Controller
Using Optional Accessories
Mounting the WB37 Intelligent Battery
A WB37 battery (excluded) can be mounted onto the remote controller in the following steps.
1
2
3
1. Push the rear cover release button to the end to open the rear cover. Remove the screws to open
the dongle compartment.
2. Insert the dongle into the USB-C connector. Close the dongle compartment.
3. Attach the dongle compartment with the screws. Close the rear cover.
1. Push the rear cover release button to the end to open the rear cover.
2. Insert the WB37 battery into the battery compartment and push it to the top. There will be a clicking
sound to indicate the battery is installed rmly.
3. Close the rear cover.
To remove the WB37 battery, press and hold the battery release button and push the battery
downward.
Mounting the Dongle
The USB-C connector in the dongle compartment can be used to connect a USB-C dongle (excluded)
in the following steps.
2
1
3
6
7
4
5

dji RC Plus Specifications

General

Screen Size	7 inches
Brightness	1200 cd/m²
Wi-Fi Protocol	802.11 a/b/g/n/ac
Bluetooth Operating Frequency	2.4 GHz
Video Output Port	HDMI
Operating System	Android
Screen Resolution	1920 x 1200
Operating Temperature	-20° to 45° C (-4° to 113° F)
Connectivity	USB-C, HDMI
Wi-Fi Operating Frequency	2.4 GHz, 5.8 GHz
Operating Frequency	2.400-2.4835 GHz; 5.725-5.850 GHz
Max Transmission Distance	15 km
GNSS	BeiDou
Charging Time	Approximately 2 hours
Compatibility	DJI Matrice 30 Series
Battery Life	Approx. 6 hours