DJI RC Plus User Manual
13
©
2023 DJI All Rights Reserved.
Powering On/O
Press once and then press again and hold for two seconds to power the remote controller on or o.
Activating the Remote Controller
The remote controller needs to be activated before rst use. Make sure the remote controller
can connect to the internet during activation.
Follow the steps below to activate the remote controller:
1. Power on the remote controller. Select a language option and tap Next. Read the Terms of Use and
Privacy Policy carefully and tap Agree.
2. Connect to a Wi-Fi network to access the internet. Then set the time zone, date, and time.
3. If you have a DJI account, log in with your password. If you are a new user, create a DJI account and
log in.
4. After logging in, tap Activate on the activation interface.
5. A prompt will appear on the screen, indicating that the remote controller is activated.
6. After activating the remote controller, choose if you would like to join the DJI Product Improvement
Project. Join this project to help DJI better understand your needs.
Check the internet connection if the activation fails. Make sure internet access is available and try
activating the remote controller again. Contact DJI Support if the activation fails multiple times.
Linking the Remote Controller
The remote controller is already linked to the aircraft when it is purchased together as part of a combo.
Otherwise, follow the steps below to link the remote controller and the aircraft after activation.
Internet
1. Power on the aircraft and the remote controller.
New database for safty available
Remote Controller Linking
To Next Page
Loading...
Need help?
General
