dji RS 4 MINI - Vertical Shooting

• To remove the lower quick-release plate, move the lever on the horizontal
plate to the unlocked position and remove the lower quick-release plate while
pressing the safety lock on the horizontal plate.
Vertical Shooting
1. Loosen ① and press the knob ② to remove the horizontal plate ③. Then, install the
plate vertically ④ onto the gimbal and tighten the knob ⑤.
4
5
2
3
1
2. Move the lever on the horizontal plate to the unlocked position ①, insert the lower
quick-release plate ② and move the lever to the locked position ③ after it is engaged.
3. Move the lever on the lower quick-release plate to the unlocked position ④, insert the
upper quick-release plate ⑤, and move the lever to the locked position ⑥ after it is
engaged.
DJI RS 4 Mini User Manual
© 2025 DJI All Rights Reserved 11