dji RS 4 MINI - Slide down - Control Center

follow sensitivity of the Ronin series stabilizers, ensuring natural transitions and smooth
start and stop movements in your footage. In Responsive mode, the gimbal responds
more quickly to hand movements during start and stop, providing a more responsive
experience.
• After balancing the gimbal, if changing the focal length, changing the lens or the
camera causes the balance status icon to turn red, or if the gimbal shakes for no
reason, it is recommended to perform automatic calibration.
• It is recommended to increase the motor strength if the gimbal is not stable
enoughand to lower the stiness if the gimbal starts to shake.
Slide Down - Control Center
On this interface, you can perform operations such as lock screen settings , Bluetooth
connection , and adjusting silent mode .
In the System Settings menu , you can perform gimbal auto check, auto lock settings,
and parameter restoration. In addition, the following features are available.
• Disable Sele: Disable Sele prevents accidentally entering sele mode and
interrupting recording.
• Orbit Follow: When enabled, the gimbal obtains smoother movements after enabling
when shooting arc shots.
• Push Mode: Enable to manually control the tilt and pan axis.
• Horiz Calibration: Try horizontal calibration or manual calibration when the gimbal is
unlevel or the axis is drifting.
• Auto O: The gimbal will automatically power o after 10 minutes of being locked and
inactive.
DJI RS 4 Mini User Manual
© 2025 DJI All Rights Reserved 19