dji RS 4 MINI - Mounting the Camera; Supported Cameras and Lenses; Preparation; Attaching the Upper Quick-Release Plate

2.3 Mounting the Camera
Supported Cameras and Lenses
Visit https://www.dji.com/rs-4-mini/specs for information on specications and make sure
the combined weight of the camera, lens, and other accessories are within the load
capacity. Refer to the Ronin Series Compatibility List for compatible camera lenses and
control features supported.
Preparation
1. Remove the lens cap and check that the battery and memory card are inserted in the
camera.
2. Make sure to power o the gimbal.
3. Move the tilt and roll locks to the unlocked position respectively and adjust the
position of both axes as shown in the gure below, then lock the axes.
4
5
2
1
3
Attaching the Upper Quick-Release Plate
Attach the upper quick-release plate to the bottom of the camera with the 1/4" screw in
the screw kit. Snap the adjustable placement guide onto the camera body before locking
the screw.
DJI RS 4 Mini User Manual
© 2025 DJI All Rights Reserved 9