Installation
After installing the intelligent tracking module, slide right from the home page to enter
the ActiveTrack settings interface and adjust according to shooting needs. For detailed
operations, refer to Slide Right - ActiveTrack Settings.
• If the status indicator does not light up after installation, check if the magnetic
attachment is in place.
• If the tracking module idle for more than ve minutes, it automatically enters
sleep mode and the indicator turns o. To wake up the module, press the
trigger on the gimbal.
Tracking and Shooting
• It is not recommended to use in backlight or low-light scenarios.
• During tracking, keep the subject 0.5 m to 10 m away from the tracking lens.
Control via Buttons and Joystick
Press the trigger to enable or disable the ActiveTrack.
Once the subject is being tracked, you can use the joystick to adjust the composition.
Press the trigger twice to disable the ActiveTrack and recenter the gimbal.
During shooting, you can switch ActiveTrack mode using the gimbal mode switch.
In Pan Follow (PF) mode, only the pan axis can follow; in Pan and Tilt Follow (PTF)
DJI RS 4 Mini User Manual
26 © 2025 DJI All Rights Reserved
To Next Page
Loading...
