dji RS 4 MINI - Firmware Update

Stop tracking: Show the gesture or press the trigger again. The indicator turns solid red.
Shooting: Whether tracking is in use or not, you can use to start a countdown for taking
a photo or starting/stopping recording. The indicator pulses yellow during the countdown.
Firmware Update
The tracking module needs to be connected to a computer for rmware update.
1. Visit https://www.dji.com/rs-4-mini/downloads and download the corresponding
rmware package.
2. Use the included USB-C cable to connect the tracking module to the computer.
3. Place the downloaded rmware package (le ending in .bin) in the root directory of
the tracking module.
4. Once copied, disconnect the USB connection.
DJI RS 4 Mini User Manual
28 © 2025 DJI All Rights Reserved