dji RS 4 MINI - Firmware Update; Connecting a Camera; Auto Tune

2.6 Firmware Update
If new rmware is available, users will be notied by the Ronin app. Update the rmware
according to the on-screen instructions. DO NOT power o the gimbal or exit the app
during the rmware update. If the update fails, restart the gimbal and Ronin app, and try
again.
• Make sure the gimbal has sucient power and the mobile phone is connected
to the internet when updating.
• It is normal for the gimbal to unlock, lock, and reboot automatically during the
update process.
2.7 Connecting a Camera
DJI RS 4 Mini supports connecting to the camera via Bluetooth or camera control cable.
Click the link or scan the QR code to view the tutorial video.
https://www.dji.com/rs-4-mini/video
2.8 Auto Tune
Press and hold the M button and trigger to start automatic calibration.
Place the gimbal on a steady at surface. DO NOT move the gimbal during
automatic calibration. It is normal for the gimbal to shake or make sounds during
the calibration.
DJI RS 4 Mini User Manual
14 © 2025 DJI All Rights Reserved