DJO VENAFLOW Elite - Specifications; Classifications; Storage;Transportation Conditions; Operating Conditions

27
ENGLISH
Specications
Size: 19.3 cm (7.6 in.) x 21.6 cm (8.5 in.) x 11.7 cm (4.6 in.)
Weight: no battery: 1.8 kg (4 lbs.) with battery: 2.2 kg (4.75 lbs.)
Power input: 100 - 240~, 50/60 Hz, 75 VA
Cord: Hospital grade, 4.572 m (15 ft.)
Standards: IEC 60601-1:2005, IEC 60601-1-2:2007
Ination mode: rapid ination and graduated, sequential compression
Bed hanger: accommodates up to 9 cm (3.5 in.)
Battery: LiFePO4 12.8V 1500 mAh
Fuse: F2AL250V, Quantity 2
Classications
Degree of Protection from Electrical Shock: Class 1
Type BF Applied parts (Cus)
IPX0 (Ordinary protection)
No sterilization is required
This device is not intended for use in an Oxygen Rich Environment
Mode of operation is Continuous Operation
Storage/Transportation Conditions
Temperatures: -13° F (-25° C) - 158° F (70° C)
Relative Humidity: 15% - 93%
Atmospheric Pressure: 500 hPa - 1060 hPa
Operating Conditions
Operating Temperatures: 10° C to 40° C
Relative Humidity: 30% to 75%
Atmospheric Pressure: 700 hPa to 1060 hPa
Altitude: below 3000 m