High Speed (Refrigerated) Micro-Centrifuge
8
failures.
4.2 Connection of the power cord and grounding
WAR N I NG：
● Do not touch the power cord with wet hands to avoid electrical shocks.
● This centrifuge must be grounded properly.
（1）This centrifuge is equipped with a 3P flat plug, grounding can be done just by plugging the 3P plug
into the outlet.
（2）An over 10A outlet which has a good ground is required, and meet with local safety requirements
to ensure its earth terminal is properly.
5. Structure
D3024
Figure 5.1 D3024 Front view of centrifuge
Seal ring of door
Operation panel
Door lock hook
POWER switch
Cover
To Next Page
Loading...