1164/1164NS Installation and Programming Guide 7
INSTALL THE 1164
MOUNT THE BASE
After selecting a location, mount the smoke detector on a flat wall or ceiling. The
ensure optimum performance, mount the smoke detector away from large metal
objects. See Mounting Guidelines for more information.
1. Grasp the detector and twist counterclockwise to remove the detector from
the mounting base. See Figure 2.
2. Use the supplied screws and anchors to mount the base to the surface.
1
Figure 2: Remove
Detector from Base
Figure 3: Mounting
Hole Locations
To Next Page
Loading...
Need help?
General