1164/1164NS Installation and Programming Guide 1
ABOUT THE 1164
1164/1164NS Wireless Smoke Detectors are 3.0V battery powered, wireless, low-profile,
photo-electric smoke detectors used with 1100 Series DMP Wireless Receivers. The
1164 synchronizes its Temporal 3-alarm cadence with other 1164s installed on the same
fire system. The 1164NS has the same functionality as the 1164, except the 1164NS does
not have a built-in sounder. The 1164NS is intended for use in installations with existing
notification devices.
INDICATOR LEDS
The 1164/1164NS provides two indicator
LEDs. Depending on how the LED is
operating, the red LED indicates there
is either smoke detected, a test alarm in
progress, low battery, or maintenance is
needed.
POWER SUPPLY
The 1164/1164NS is powered by one 3.0V
lithium battery. (Panasonic Model CR123A
or DMP Model CR123-FIRE). Typical
battery life expectancy for the 1164/1164NS
is at least one year.
OPTIONAL TAMPER
The 1164/1164NS features a tamper switch
to send a trouble message to the panel
if the detector is removed from the
mounting base.
CADENCE SYNCHRONIZATION
The Model 1164 only provides a cadence
synchronization with other 1164s on the
system. This option can be enabled in
device programming.
To Next Page
Loading...
Need help?
General