EasyManuals Logo

DMP Electronics 1164 User Manual

DMP Electronics 1164
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
1164/1164NS Series Installation and Programming Guide 20
Heat-Sensing Fire Detectors
Heat-sensing fire detectors shall be installed in all areas where required by the NFPA
codes and standards or by the authority having jurisdiction.
Detection in New Apartment Buildings
Approved, single-station smoke alarms shall be installed in accordance with 7-6.2.10 of
NFPA 101 outside every sleeping area in the immediate vicinity of the bedrooms and on
all levels of the dwelling unit including basements. (For exceptions, refer to this section of
NFPA 72.)
Detection in Existing Apartment Buildings
Approved, single-station smoke alarms shall be installed in accordance with 7-6.2.10 of
NFPA 101 outside every sleeping area in the immediate vicinity of the bedrooms and on
all levels of the dwelling unit including basements. (For exceptions, refer to this section of
NFPA 72.)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DMP Electronics 1164 and is the answer not in the manual?

DMP Electronics 1164 Specifications

General IconGeneral
BrandDMP Electronics
Model1164
CategorySmoke Alarm
LanguageEnglish