DMXking.com • JPK Systems Limited • New Zealand
0129-700-4.4
8
eDMX MAX nodes provide IGMPv2 Reports necessary to participate in a multicast environment as necessary for sACN/E1.31
protocol. Sometimes due to network infrastructure issues an IGMP querier is not present and in these situations, you can opt to
have the node generate ongoing unsolicited IGMPv2 Reports.
To change the node Network Settings make applicable changes then click Update Network Settings.
Selecting Firmware Update will prompt for an appropriate firmware file and upload upon confirmation. A built-in boot loader
permits updating of the eDMX firmware. We do not recommend performing firmware updates over routed networks. Note only
signed encrypted firmware files from DMXking.com can be successfully loaded to ensure you won’t brick your device by accident.
Future firmware releases for this product will be in the form 0128-500-VersionMajor.VersionMinor.enc
To Next Page
Loading...