Need help?Do you have a question about the DMXking LeDMX2 MAX and is the answer not in the manual?
General| Protocol | Art-Net, sACN |
|---|---|
| Output Channels | 1024 |
| Input Channels | 1024 |
| Ethernet Ports | 1 |
| Power Supply | 5V DC |
| DMX Ports | 2 |
| DMX Connector | 3-pin XLR |
Details product variants and firmware updates.
Explains the meaning of status indicator LEDs on the device.
Outlines the factory default IP address and network parameters.
Details default settings for update rate, master level, etc.
Specifies default pixel type, count, and mapping for ports.
Describes settings for the DMX512 input/output port.
Shows the eDMX Configuration utility's network settings interface.
Explains specific parameters within the Settings tab of the utility.
Details configuration options for pixel outputs in the utility.
Details configuration options for the DMX512 port in the utility.
Explains settings related to the device's recording functionality.
Describes a utility for testing and displaying DMX data.
Explains the status report provided by the device.
How to set device names for easier network management.
A consolidated overview of the device's configurable parameters.
Discusses merging capabilities for the DMX512 port.
Discusses merging capabilities for the pixel output ports.
Lists valid source combinations for merging.
How priority affects DMX input handling.
Explains DMX input modes and network traffic.
Provides sources for purchasing LED pixel strips.
Clarifies the difference and usage of DMX512P.
Guidance on selecting an appropriate power supply.
Explains common color fade problems and solutions.
Information on product version evolution.
Compares controlling pixels via DMX512 versus network protocols.
Specifics on connecting WS2813 pixel strips.
Safety warning regarding exposed AC terminals.
Advice if a question is not covered.
Details the terms and conditions of the product warranty.
To Next Page