DMXking LeDMX2 MAX - 7. TECHNICAL SPECIFICATIONS; Where to Buy LED Pixels

DMXking.com • JPK Systems Limited • New Zealand
0128-700-4.0
20
7. TECHNICAL SPECIFICATIONS
• Dimensions: 53mm x 32mm x 90mm (WxDxH).
• Weight: 75grams.
• Power input 5-24Vdc
• UCB-C power input – for control electronics only
• Control electronics power requirements: 5Vdc @ 200mA
• Maximum continuous current per output 8A
• Buffered 5V Clock and Data lines with over voltage fault protection
• WS2811, WS2812, WS2812B, WS2813, UCS1903, UCS2903, UCS2912, UCS8903, UCS8904, PL9823, TM1934, APA101,
APA102, SK9822, APA104, APA106, APA107, INK1002, INK1003, SM16703, SK6812, WS2801, LPD6803, LPD8806,
DMX512-P, P9813, GS8208, TM1814, TM1914A, TLS3001 pixel types and equivalents supported. Note many pixels are
actually the exact same protocol timing as those listed. Check with DMXking support
• Fast 800kHz and slow 400kHz data rates supported for WS2811 / APA104
• SPI pixels can be clocked at 500kHz, 1MHz, 2MHz and 4MHz
• Up to 680 RGB pixels / 4 DMX universes per output
• Ethernet 10/100Mbps Auto MDI-X port
• Art-Net, Art-Net II, Art-Net 3, Art-Net 4 and sACN/E1.31 support.
• Universe Sync Art-Net, sACN and Madrix Post Sync.
• Both HTP and LTP merging of 2 Art-Net/sACN streams on Port A
• HTP merging of 2 Art-Net/sACN streams on Pixel ports
• sACN Priority
• IPv4 Addressing
• IGMPv2 for multicast network management
• Operating temperature -10C to 50C non-condensing dry environment
8. WHERE DO I BUY LED PIXELS?
There are many sources for LED pixels in strip and other formats. Pretty much all of it comes out of China and it can be more cost
effective to source through sites such as Aliexpress which provide individual item sales without much effort.
Try these Aliexpress stores or direct from a manufacturer:
• https://kinggreen.aliexpress.com/store/713947
• https://www.aliexpress.com/store/701799
• http://www.shiji-led.com/Index/index.html
9. FREQUENTLY ASKED QUESTIONS
Q: Does DMXking recommend any particular type of pixels or control ICs?
A: We highly recommend APA102/SK9822 pixels because they have a higher clocking rate and an additional 5bit master current
control. This really helps with smooth fades at reduced Master Level.